Revolutionary air / oil gun, involving the power of the air gun with the skills of handling and ease of pointing the guns. Available in two versions: Camu 3D and Black. Standard equipment: The gun comes complete with 6.75 mm and pump rod. The reel "ONE" mimetic is standard on Camu 3D version (with capacity of 50 m in steps of 80 and 90 and with 80 meters in measures 100 and 110). The barrel of the gun is produced using Hydro Forming technology for obtaining a particular geometry, designed for maximum maneuverability in the water. The internal is 11 mm in diameter and can be used rods of diameters between 6 and 7 mm. The trigger mechanism has been made to maintain a high-sensitivity shooting the trigger, as independent as possible of the canyon air preload. This result was obtained thanks to a gearbox crank the load between the trigger and the retrogatillo. The tooth to engage the shaft, the bore has been made with a special high tenacity steel is treated with a special coating that reduces friction. The mechanism has been joined by an innovative steel nail line release lateral tilt, as modern guns. The innovative handle design resembles the modern band of guns. As in the latter the hand holding the gun is positioned in line with the rod containing the gun and not under the gun as in all existing oleopneumáticos rifles on the market today. This aspect allows the dam acciónde pointing in a hurry and instinctive, just as in the speargun. The handle can be easily removed thanks to a generous stainless steel pin attached to the barrel. Once removed there is access to load the barrel valve during the use of the gun remains stagnant. The knob can be replaced with an ergonomic grip is available as a spare-handed.
